AI-assisted article

This article was prepared with AI assistance based on an analysis of the current Lumina Studio source code, existing Wiki content, and relevant workflows. It has been checked against the current version, but omissions or details that become outdated may remain as the software evolves. If you find an error or have a clearer explanation, example, or suggestion, please leave a comment on this page or propose an edit on GitHub.

Base-Plate Thickness

Thickness controls the foundation below the colour layers. The default is 1.20 mm.

The UI range is 0.24–3.44 mm in 0.08 mm steps; the generation schema accepts the safety range 0.20–3.50 mm. The UI step keeps the base aligned with a commonly used print-layer height.

Base thickness does not include colour layers, relief height, or a transparent coating. Add those parts separately when estimating the finished height.

Relief mode clamps its extra height against the minimum required by the current base and material layers. Fridge Magnet mode may also increase the effective spacer thickness to preserve wall thickness around a magnet pocket; disabling the feature restores the saved base thickness.

Choose the value for the output size, attached features, material, and slicer result. Changing it invalidates the existing 3MF.